потолочный фильтр СМИ FF560GX / F5

Specially designed for terminal filtration of auto spay-paint booth as final filtration barrier to filter the particles which will damage spray-paint quality out from the intake air stream High dust holding capacity, low pressure drop and economical Full soaking in adhesive and a sticky coating effectively prevent any release of fibers and prohibit of particles larger than 10 microns; Constructed from selected high-performance synthetic fiber by progressive density multi-layer technique Ensures the air throughout the auto assembly shops and automatic refinishing factory's spray-paint booth evenly spreads, forming laminar air flow Conform to the fire-proofing classification standards of European Union DIN53438-F1 and American UL900-Class 1 Quality conforms to EN779 standard Resistant to chemical impacts of such as chemical solvents and acid smog Adhensive and enhanced rigidity ensure high dust holding capacity, robust construction and resistance to squeezing The air exit side of filter media is particularly compact and smooth PERFORMANCE DATAProductFF560GX/F5Rated Air Flow900 m3/h•m2Rated Air Flow Velocity0,25 m/secInitial Resistance26 PaFinal Resistance450 PaAverage Efficiency @ 0,4 μm*46%Average Arrestance96%Dust Holding Capacity430 g/m2Filter Class acc. EN 779:2002F5 APPLICATION PARAMETERS Temperature Resistance Up to 100°C Temperature Resistance Short Peaks Up to 180°C Nominal Thickness 20 mm Relative Humidity:100% Standard Roll Sizes 2 m x 20 m &1 m x 20 m Regenerative / Washable No