Портативный сдвиг Pin Тип Бринеллю тестер

Featuers 1) Accurate and consistent test force, controlled by precision shear pin. Works in static type and hammer impact type and follows Brinell hardness test method. 2) According to the similarity principle of Brinell hardness test, this tester has 1580kg test force, 7.26mm spherical indenter, F/D2=30. The test condition is equivalent to the commonly used 3000kg test force, 10mm ball condition. 3) High accuracy and repeatability; tested by National Institute of Metrology with tolerance less than ±3%. The accuracy meets the requirements of ISO 6506 and is no lower than that of the bench Brinell hardness tester. 4) Easy, quick and simple operation. Static type for testing medium and small size orkpieces; hammer impact type for testing large workpieces. 5) Only one inexpensive shear pin is consumed in each test. 6) Good choice to replace Leeb hardness tester and Poldi type hammer impact hardness tester with lower accuracy. Technical Parameters Test Force: 1580kgToleranceof test force:< 0.5%Indenter:7.26mm steel ball indenter (testing range:100-400HB);Optional indenter:4.0mm carbide ball indenter (testing range: 400-650HB)Accuracy:Meets the requirments of ISO6506Error of static type: <±3%HBError of hammer impact type: <±5%HB Opening Size:(H×D) 150mmx100mmNet Weight:Portable type--4.2kgApplication:Casting, Forging and steel raw materials etc.Package Gross Weight:11.6kg (portable type + hammer impact)Package Dimensions:700mm×210mm×375mmStandard Package Tester Test head 7.26mm steel indenter Flat anvil V anvil Support handle Indenter head holder Shear pins (250 pcs) Brinell test block Pin removal tool 2 rubber protective caps 20x reading microscope Carrying case Optional 7.26mm steel indenter 4.0mm carbide indenter Test head Shear pins (bag of 250 pcs) Brinell test block Dome anvil 40x reading microscope 3 lb hammer