CP-20D Blow Molding Machine is one-step method, two-time molding. It is suitable for producing PET, PE, PP,AS,PS and other plastic containers and bottles in all shapes from 10ML to 3L, such as mineral water, pesticide bottle oil bottle cosmetics bottle, wide-mouth bottle and hot filling bottle, etc. This multifunctional semi-automatic blow moulding machine is our new design featuring novelty, pretty and exquisite. For its good quality and our perfect service, its your best choice. Characteristics1) Adopts revolving infrared pre-heater to ensure extremely even heating of PET preforms. 2) The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different pressure requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. 3All of the electrical components adopts the International advanced high-tech product. Product standard No.: Q/HYF01-1998 Patent No.: 00207917.8 00242639.0 1. Technical parameter Model CP-20DSuitable materialsPET, PP, PE, PC, AS, PSProductivityDepend on bottle design1100-1300 pcs/h (3L) Max. product volumeDepend on cavity amount1.5L(2cavities) ; 3L(1cavities) Mould1 or 2 cavities1 or 2 cavitiesMax. Bottle diameter120mmMax. Height320mmMould board area500*410mmMax. Mould thickness180mmMold stroke190mmMax. stretch340mmClamping force120 KNPowerElectrical source220380V, 3 phase 5060HzHeating Power3.6kwWorking pressure0.8 MpaBlow air pressure2.0 MpaMachine SizeL*W*H1380*630*1760mmOven SizeL*W*H1800X650x1350mmMachine Weight600kgOven Weight 300kg Auxiliary equipmentsHP Air Compressor0.63m3 /3.0Mpa/11KWAir Dryer1.0 m3 /3.0 Mpa /375WAir Filter1.0 m3 /3.0 Mpa