Полный автоматический двойной слой спрей автоклав стерильные

1,Uniform water exchange mode realizes uniform temperature without dead angleIt utilizes the international advanced technology,namely hot water circulation and immersion,for sterilization. In the process of sterilization, circulation water in the sterilization trough will be uninterruptedly shifted up and down, left and right. It ensures the heat distribution of any spot in the trough is even. It effectively puts an end to the phenomenon of dead area in the process of sterilization and makes the guarantee period of the products more stable and longer. The temperature in the sterilization tank stays stable in all stages of the sterilization, which ensures the qualification rate of F-Value. 2,Utilize double-tank hot water circulation for sterilization. Heating the water in the hot water tank to the required temperature of sterilization in advance, the sterilization time can be reduced and work efficiency can be improved. 3.The working medium during sterilization is recyclable. It reduces the production cost by saving energy, time, labor and material resources. PLC(Programmable Logic Controller) 4.The whole sterilization process is controlled by PLC. It is a one-time action without manual operation. It utilizes the chart plate and screen touch control. All time intervals are controlled by the simulate sensor and automatic valve. The digital exhibition of pressure and temperature makes it applicable to input any pre-programmed pressure and temperature models into the computer. The computer can hold 100 sterilizing formulae. 5.adopt simulation temperature control system,which could enactment multi-stage of calefaction mechanism The sterilizing method by multi-stage heating can minimize the heat on food, which can keep its original flavor, taste, nutrition and color to the utmost and make every kind of food sterilized in its best condition. The accuracy of the sterilizing temperature is up to ±0.3 so as to avoid over boiling or incomplete sterilization. 6.Every retort can be equipped with F-value measuring instrument. The F-value software can make the F-value calculation every 3 seconds. All sterilizing data including sterilizing conditions, F-value, time-temperature curve, time-pressure curve and so forth can be saved or printed after the processing of data processing software to serve the production management.7.It could store at least one hundred of sterilization formula in the computer.