Полиамид 6 - Оценка

ORACLE TMD W10 NC is a low viscosity, PA6 injection molding homopolymer, easy flow and processing friendly. general purpose injection molding PA6 exhibiting excellent fluidity for filling thin sections. It possesses the combination of strength, stiffness and toughness properties as well as excellent chemical, thermal and abrasion resistance. Possessing a modified crystalline structure for increased property performance and faster cycles. TEST ITEMSTEST METHOD AND CONDITIONSTEST RESULTSTEST METHODUNITCONTITIONS(DRY)23DensityISO1183g/cm31.08Melt Volume RateISO1133cc/10min(275)2.16kg30.6Tensile StrengthISO527MPa10mm/min90Tensile strain at breakISO527%130Flexural StrengthISO178MPa80Flexural ModulusISO178MPa2,200Charpy NotchedISO179KJ/m22.9m/s-1J11Izod Notched ImpactISO180KJ/m23.5m/s-1J7Flame resistanceUL-94HBAsh content%0Processing GuidelinesMaterial Handling Max. Water content: 0.12% Product is supplied in sealed containers and drying prior to molding is not required. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 °C (176 °F) is recommended. Drying time is dependent on moisture level, but 4-6 hours is generally sufficientTypical Profile Melt Temperature 220-250°C (428-482 °F) Mold Temperature 60-90 °C (158-194 °F) Injection and Packing Pressure 35-125 bar (500-1500 psi)Fill Rate Fast fill rates are recommended to ensure uniform melt delivery to the cavity and prevent premature freezing. Surface appearance is directly affected by injection rate We direct our energies to offer users the high-performance, consistent-quality ,cost-saving nylon.Eachbatchhave to pass strict test before they go out . ORACLE provide six series polyamides resin to serve users a wide range of needs >>> General Purpose Homopolymer >>> Reinforced nylon resin(Glass-reinforced and/or Mineral-reinforced) >>> Flame Retarded >>> Friction&Wear resistance >>> Impact resistance >>> Special applications Contactus forfurther information, general guides and/or additional information about ventilation PS: ORACLE nylon products aremainly usedto makehigh quality and reliable products. we don't offer recycledor/and cheap and nastynylon material