подогрев пола термостат

Introduction The BYC07A.N thermostatis a type of thermostat with large, touchable LCD, which is fit for controlling the three speeds fan coil in the central air-conditioning with two or four pipes, and controlling the actuator for water system and electric heating devices. With our thermostat, you can enjoy a cosy and comfortable living environment.The BYC07A.N thermostatis used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat. The thermostat acquires the actual temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected set point. Application For the control of warm-water( floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings... The BYC07A.N thermostat equipped with extremely small junction box and simple installation, is suitable for wall box all over the world. Features On/off control output for heating device Symbol indicator when heating is on Temperature limitation function for protecting the wooden floor Current room temperature displaying when the thermostat is switched-off “Key-lock” function for protecting the setted parameters( especially suitable for Public Places) Technical data Voltage: AC85-230V( AC110V/ AC24V available ) Power consumption: 15W Setting range: 5°c 40°C Limitation range: 4 40°c Switching differential: ±0.2K Ambient temperature: -5 40°C Protective housing: IP20 Housing material: self-extinguishing PC Floor sensor: rubber-thermoplastic NTC sensor, cable length is 3m Thermostat BYC07A.Ndiagram