ПГБ-3000 портативный Твердость teser

Features The test force is easily applied to 3000kg with the hydraulic system, The accuracy of the testing force can be up to 0.5% of full scale. It can result in the permanent indentation for reinspection by applying 3000kg test force with 10mm ball indenter. The test principle and accuracy meet the requirements of ISO 6506 and ASTM E110. The instrument is easy to use, portable, accurate and durable. It is easy to test on site. Because of its large testing range from 0 to 360mm, it can test workpieces of different dimensions and shapes. The instrument can be used to test any position of the workpiece, such as, upside, bottom and side face. With optional test force and indenter diameter, the instrument can test softer metals such as aluminum and copper. The instrument is widely used and accepted worldwide. It is known as the best portable Brinell Hardness Tester. It is used to test the casting, forging, steels, nonferrous metals and workpieces after various kinds of heat treatment. Main Technical Parameters Test Force:3000kg (500kg, 750kg, 1000kg, and 1500kg optional) Indenter:10mm carbide ball indenter (5mm optional) Testing Range:100-650HBW (expendable to 28- 650HBW) Max. Specimen Height:360mm Throat Depth: 100mm Accuracy: comply with ISO 6506 Repeatability: comply with ISO 6506 Net Weight: 13.8kg Application The Brinell hardness tester is mainly used to test raw metals,rough castings and forgings, and semi-finished products afterheat treatment. Because of its large indentation, this type oftester is not normally used to test finished products. Standard Package Tester Handle Standard Brinell hardness block 20X reading microscope (with LED light) V anvil Flat anvil Dome anvil 10mm spare carbide ball indenter Optional Accessories Standard Brinell hardness block 5mm, 10mm carbide ball indenter Rechargeable handheld angle grinder