Переменного тока в источник питания постоянного тока (черное покрытие)

AC to DC power supply (black cover) 1. Competitive price, high qaulity, best service, prompt delivery 2.105 output capacitor 3. AC input power suitable for the world 4. High efficiency and low operation temperature 5. Soft-start current can reduce the AC input impact effectively 6. With short-circuit and overload protection 7. Compact size, light weight 8. 100% full-load burning test 9. Installed with EMI filter, minimum wave ModelS-35-5S-35-12S-35-15S-35-24DC output voltage5V12V15V24VOutput voltage rang(Note:2)±2%±1%±1%±1%Rated output current7A3A2.4A1.5AOutput current range0-7A0-3A0-2.40-1.5AWave and noise(Note:3)75mVp-p100mVp-p101mVp-p100mVp-pInlet stability(Note:4)±0.5%±0.5%±0.5%±0.5%Load stability(Note:5)±1%±0.5%±0.5%±0.5%DC output power35W36W36W36WEfficiency70%76%78%78%Adjustale range for DC voltage+10,-5%+10%+10%+10%Input current0.5A/115V 0.25A/230VAC Inrush currentCold-start current 15A/115V 30A/230VLeakage current<0.5mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: auto recoveryTemperature coefficient±0.03%/°c(0 50°c)Setup, rise, hold up time200ms, 100ms, 30msVibration10-500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal 1.5KVAC, Input and enclosuer 1.5 KVAC, Output and enclosuer 0.5 KVACWorking temperature and humidity-10°c +60°c (Refer to output derating curve) 20% 90% RHStore temperature and humidity-20°c +85°c, 10% 95%RHWeight0.4KgsSatety standardsMeet UL 1012 requirement(Not apply for the mark)EMC standardsMeet FCC aprt 15 J Conduction class BNote: 1. The testing condition for the parameter above is: 230VAC input, rated load, 25oC 70%RH.Temperature. 2. Error. include the setting error, line stability and load stability. (Note:5) 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%. 6. Total output canbe maximum Current, total load can not exceed the maximum output power.