PC800x600 Молотковая дробилка

Application Hammer crusher is mainly applied to low abrasion materials with medium hardness and compression strength not exceed 100Mpa. Such as coal, salt, chalk, gypsum, bricks, tiles, limestone, glass, etc. It is also used to crush wood chips with strong fiber structure and tenacity, and the waste from asbestos cement to recycle asbestos fiber, etc. In addition, hammer crusher can be not only applied in crushing line and sand production line, but also applied instead of cone crusher. Performance and features Hammer crusher has the advantages of high product capacity, high crushing ratio, low power consumption, uniform products partial size, simple structure, compact and light, low investment cost, easy to management, etc. The defects are: when crushing very hard materials, it will cause greater wear of hammer and grate and consume more metal; it needs more maintenance time and uniform feeding of materials; when crushing soft-moist materials, the capacity will become significantly lower and even stop because of material jam. In order to avoid jam, the moisture content of materials should be less than 10%-15%. Technical Data Model: PC800x600 Rotor diameter (mm): 800 Rotor length (mm): 600 Rotor speed (r/min)900 Max. feeding size (mm): <350 Output size (mm): 5-20 Capacity (t/h) :18-30 Motor power (kw): 45 Number of hammer (piece): 28 Weight (t): 2.8 Overall dimension (mm): 2360*1490*1415