Пароход лица с озоном S-202BS

Facial Steamer with Ozone S-202BS Introduction: The facial steamer is used to clean the skin thoroughly by opening the pores in order to remove impurities (like blackheads, whiteheads, make up, etc.) and generally revitalize the skin. The addition of ozone enriched steam helps to promote a more sterile environment for further treatment of the skin. Operations: Adjust the height of steamer. Be careful of bumping. 1.Fill the glass jar with distill water only through water funnel (S5), do not exceed the red warning line. Make sure the jar is attached firmly and perfectly to the steamer. 2.Connect power plug. Turn power on (S1), power indicator (S3) should light up. Steam will come out in around 10-15 minutes after the power is switched on. 3.Turn ozone (S2) on only when steam comes out. Ozone indicator (S4) should light up. Do not turn ozone on when there is no steam. 4.Position steam jet to aim at clients chin and steam should travel over his/her entire face. 5.After finishing, turn ozone off first, then power. 6.Unplug power socket and wait till the glass is cool before removing it from the machine. 7.If it is needed to stop steaming during operation, turn power and ozone switches off 8.For safety purpose, the machine will automatically shut off when water level is below the heating element. Skin TypesDistanceDuration (Mins)OzoneOily, Combination 20cm5-8YAcne, Blemish 20cm8-10YNormal 25cm10YDry, De-hydrated, Mature 30cm3YSensitive, Sunburned 35cm5-8NCapillaries, Inflammation 35cm5NPigment 30cm10N