Панель сварная машина

pipe outside diamater : φ22 φ89mm pipe wall thickness: 3 10mm flat steel Width: 8 110mm flat steel thickness: 5 12mm length of tube panel: 24m Maximum width of tube panel: 1600mm Tube and flat steel material: carbon steel or alloy steel workpiece height roller: 850mm wire diameter: φ1.2 φ2mm wire feeding speed: 1 10m/min wire Pan: 4, each 150 180kg wire speed: 0.5 2.0m/min adjustable welding rectifier: 710A in the case of 100% load Capacity: 280kw Compressed air: 6 (kg/cm2) 588kPa (5kg/cm2 for good) Torch: four sets, two each welding torch for a group , a total of two groups. Each group by the center to the left (right) lateral movement 0 800mm. the distance of front and rear 2 torch each group is 30mm, with the front and rear angle of tube panel and torch being 90 °, the length of the torch could refer to the existing systems of 1600 × 4 tube panel welding machine. The cylinder stroke vertically of the torch is 100mm, added fine-tuning trip manually 40mm, suitable for tubes panel welding of different specification of types .