открытый телекоммуникационного шкафа

SP-OC-A 19''Outdoor Cabinet Specification: 1.Thecabinet adopt the double wall type design. It is composed with main body, roof, the rear panel, the side panel and the base. 2. The double wall type rear panel, the dual side panel, the bolts arefixed by inside. The double wall type gate has the bikini fixing device, after closes the gate not to be able to see the bolt from outside. Leans the kneading board to cover the cabinet and the foundation, eliminated entered the cabinet by the compulsory measure weakness. 3. Inside and outside side kneading board (spacing 25mm) the band provides ventilates the channel, supports the cabinet internal heat change and may reduce the sunlight illumination the influence. 4. The roof panel has all around stretches out 25mm high 75mm to obstruct the rain awning, obstructs the rain awning to have the integrity well ventilated to clamp the trough, guarantees the gas the exchange. 5. The foundation may use the entire block or divide three parts of dense closing boards to seal. 6. In the cabinet may use 19 "to install the structure, also may install the mounting panel. 7.The natural wind cools, the cabinet crown is loaded with 4 exchanges to pull out the ventilator, lower part the cabinet two sides opens has the blowhole and attaches the cotton and kapok dust cover, both guarantees the air along the exchange, and has the very good dustproof function. 8.Protection rank: IP55, EN60529/10.91 9.We can design the structure as the customer requirement. Surface treatment: Degreasing, phosphorization, electricity swim the primer, static electricity dusting. Material:SPCC quality cold rolling steel plate, the stainless steel or the aluminum zinc plate. Color: RAL5012(Top cover and base) RAL7035(The others) Item NO.Width(mm)HightDepth(mm)Height(mm)SP-OC-A86148006001375SP-OC-A88148008001375SP-OC-A86168006001575SP-OC-A88168008001575