Wastewater treatment UV disinfection module 1. Waste water disinfection (water capacitywithin 3000 T/D) 2. Open channel 3. 2-4 lamps in a module (low pressure/ high output) 4. High transmittance quartz sleeve 5. Stainless steel reaction chamber: SUS 304 or SUS 316 available 6. Manual switch (on/off) 7. Manual/ Auto cleaning system Originally imported UV lamp from America or Europe, with operation lifetime over 9000 hours Electrical Supply: 120V/60/Hz or 220V/50Hz Maximum Operating Pressure: 125PSI to 10 bar Operating Temperature: 2 40 centigrade Various models provided for your required product parameter 1. Specific water quality: used for disinfecting municipal water, industrial water, waste water, tap water, well water or somewhere else 2. SS in the treated water, BOD or COD index if possible. 3. the application of the water 4. the pretreatment procedure before using UV sterilizer Application: Mainly used for wastewater disinfection Municipal water, hospital, industrial sewerage Median water recycling The factors influencing UV effectiveness 1. The type of lamp in the application 2. The length of lamp being used 3. The physical design of the UV's water exposure chamber 4. The condition of the water being treated especially SS index