ОП -4Eth волокна Media Converter 100Mbps

OP-4Eth(100M) Function Extend the Ethernet transmission distance, and expend the Ethernet coverage radius.Be able to convert signals between the Ethernet electrical port (10M or 100M) and optical port. Four switched Ethernet, they can be transmitted over fiber simultaneously; also can be setup the port isolation, so four Eth port don’t communication each other. Support SNMP network management to come true the centralized management.Feature support the long packet of 1536bytehave built-in watchdog to avoid system haltedhave function of dual backup of optical interfacesupports 5 kinds of set mode: 10M/100M half duplex, 10MFDX/100MFDX, , 10M/100M auto-adaptivethe storage mode can be set up the direct through and the store forward modeSupport SNMP management system Tech-parameters Mechanical Feature Work temperature0°C 50°C Storage temperature-40°C +70°C Relative humidity95% Power supplyAC220V,DC-48V compatible Voltage range 180VAC 240VAC,-38VDC -72DC, dimensionStandalone: 218*155*44mm standalone(4U frame): 483*177*171mm Optical feature Working mode single/multimode optional Fiber interfacesingle/dual fiber,FC/SC optional Transmission distance0 2Km(multimode),0 20Km(single mode), 0 40Km(single mode), 10 60Km(single mode) 15 120Km(single mode)optional 850nm/1300nm/1310nm/1550nm >-8dBm <-36dBm wavelengthSending frequency Receiving sensitivityInternet standard Working mode 10M/100M auto-adaptive, compulsory mode can be set up. Internet standard IEEE802.3,IEEE802.1Q Physical interface RJ45 Transmission distance 100m