OEM СО2 фракционный лазер US800

OEM CO2 fractional laser US800 Applications: Skin renewing and resurfacingWrinkle removal, skin tighteningAcne and acne scar removalSmooth burnt scars and surgery scars, etcRemove intractable chloasmas and pigmentationSun damage recovery Features: Particular designed intelligent laser control system ensures a precise treatmentLaser energy shooting is an even steady and safe treatment process.Wide range application, effective treatmentEasy and fast treatment, no down time. Parameters: Basic specification Laser mode Low-valance mode Wavelength 10.6μm, far-infrared laser Pulsed radiofrequency 0.530 W Control Touching switch, microprocessor-controlled Display LCD display Lcd 1.Max power : 120W 2.Pulse width: 0.05-1s Pulse 1. Average power: 40W 2. Pulse frequency:33.3 Hz Working mode: Continuous, single pulse, repeat pulse and super plulse Scan Graphics Square, rectangle, round or customized graphics Dot quantity 400 dots at most Working state Hyper-pulsed mode Scan mode Sequence scan or Random scan Pulse energy 10mj to 130mj is optional for each dot. Technical specification Laser apparatus Sealed off laser device stimulated by direct current Condenser focus f=100mm Beam divergence angle 0.3 mrad Spot size Min 0.2mm at the focus Radiation time 1 ms Interval time 1 ms Aiming beam Less than 2mW, 635nm red semiconductor laser Cooling system Closed loop circulating water Environment temperature 5-400C Relative humidity <80% Temperature in transit -40-500C Humidity in transit <85% Beam transport device Articulated arm with 7-joint and balance weight Atomospheric pressure 86.0kkpa-106.0kpa Warning up time 5 min Electromagnetic requirement No electromagnetic Field interference N. weight 55kg Power supply 230V/110V