Одноосное Геосетка

Uniaxial Geogrid Product description Uniaxia geogrids are made of macromolecule polymer by the process cf being stretched out, formed into lamella, punched regularly and then longitudinal elongated, which enable macromolecule into a oriented, linral,equably distributed uniform ellipsoidal reticulation with intensive node which have higher tensile strength and tensile modul. It should be especially noted that we are able to supply those products with 2 percent to 5 percent tensile rate and at least 150 Mpa tensile strength so as to give soil a perfect standing and diffusing chain systen which enable us be the world leading manufacture in this aspect .Those products can be used as reinforcing concrete materials for all kinds soil. Applications 1It is mainly used in retaining wall, bridge abutment ,steep slope project and so on. 2Retaining wall and bridge abutment belong to force bearing structures and bear all external loads such as active soil pressure, support of structure, upper part and temperature stress, Under the function of large tension and repeated function of dyanmic load, molecule suructure of reinforcement material occures fatigue, its performance occurs attenuation and aging of grid quickens. In order to avoid large deformation of structure caused by creep of creep of reinforcement material, unidirectional grid with high-density poluethylene(HDPE) as raw material shall be used. Product technological standard ProductTGDG25 TGDG35 TGDG50 TGDG80 TGDG110 TGDG150 TGDG170 TGDG200 width, m 1.0 2.0 3.0 4.0 Extends the rice stretch to submit every time the strenth,KN/m ≥ 25355080110150170200The elongation ratio, %≤ 102%Time elongation ration drawingforce, KN/m ≥ 7101220324864855%Time elongation ration drawingforce, KN/m ≥ 142028486490120145