ОДНОФАЗНЫЙ ЭЛЕКТРОННЫЙ на DIN-рейку активной энергии MET

Product name:SINGLE PHASE ELECTRONIC DIN-RAIL ACTIVE ENERGY METER, DIN-RAIL METER, meter APPLICATION: HCM090 SINGLE PHASE ELECTRONIC DIN-RAIL ACTIVE ENERGY METERis a kind of new style SINGLE PHASE ELECTRONIC DIN-RAIL ACTIVE ENERGY METER,this meter completely accord with relevant technical requirements of class 1 and class 2 single phase DIN-RAIL METER stipulated in National standard GB/T17215-2002 and international standard IEC61036.This DIN-RAIL METERcan accurately and directly measure active energy consumption from single phase AC electricity net. It can display total energy consumption by step type impulse register or LCD display. Functions and features: 1.35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board setting (mounting holes center distance 63 mm), users can choose any one by themselves. Six pole width (Modulus 12.5mm), this DIN-RAIL METER complying with standard JB/T7121-1993. 5.Single direction measure single phase two wire active Power consumption. It is nothing with direction of the trend of load current. this DIN-RAIL METERComplying with standard IEC 62053-21. 6.Directly connect and use, there are two types you may select. Standard configuration type S connection, may select type T connection (this DIN-RAIL METER Configuration code is TG). 7.Standard configuration extended terminals cover, in order to protect to use electricity safely, may select short terminals cover. (this DIN-RAIL METERConfiguration code is AH). Technical parameters ModelAccuracyReference voltage (V)Current specifications (A)Starting current (A)Insulation performanceHCM090Class 1127 2305(30) 10(50) 20(100)0.02 0.04 0.08AC voltage 4kV for 1 minute, 1.2/50us waveform impulse voltage 6kV If you need different reference voltage or current specification for this DIN RAIL meter, please advisory our sales. 2.Standard configuration 5+1 digits display (99999.1kWh) by step motor and pulse machinery counter. May select 6+1 digits display (Product Configuration code is AK). Standard configuration one port of pulse output passive (polarity), May select increase a distant port of pulse output passive (no polarity), (Product Configuration code is AI). And contact with all kind of AMR system conveniently, this DIN-RAIL METER complying with standard IEC 62053-31 and DIN 43864. 3.Bicolor LED instructions power state (green) and signal of power impulse (red). 4.Standard configuration don’t detect direction of the trend of load current. May select Automatic Detecting the direction of the trend of load current. And instructions (Only red power pulse signal when working, that is meaning the load current reverse).