ОДИН JACQARD вязальные машины

FEATURES OF KNITTING MACHINES Jacquard series were the newest machine developed by our company based on years of experience in machine work technology and knitting and weaving process The main frame is made from cast iron with excellent anti-vibration capability and provided with reasonable design of reinforcing rib structure that can reduce possibility of deformation and increase rigidity Design of location between main plate gear and main plate adopts a special patent structure and can reduce the noise produced by gear greatly, not improving the operation of gear, but also promoting precision of the whole machine. Needle selection system adopts the needle selection unit manufactured by WAC of Japan, of which 2 or 3 bits selection technology can weave all kinds of fabric free from limitations on pattern. Selection unit can meet the demand of high-speed operation of the machine. The machine selects needles in cylinder and can weave fabric of which patterns are not limited. The selection unit can select needle for three ways of knitting, including loop, tuck and float. Any kind of complicated pattern can be transferred into specific control instructions by computer-aided pattern system accurately and systematically. These instructions can control the needle selection unit to weave large patterns on single-side of a fabric; as for the bottom side, it will be weaved by twin-raw faller on the dial. Precise encoder can calculator the position and calibration zero position of needle accurately ,also can calibrate any error due to the force of inertia during start and stop automatically;in addition,a detector is added to assist zero calibration for accuracy of selection;thus the control system can check the encoder,judge whether its signal is proper and ensure stability of the whole system.