Общие железнодорожных насос испытательном стенде

TLD-CRS300 Common rail pump tester: The function of the tester for CR high pressure pumps is to provide the desired signal to drive the solenoid in the pump being tested. CR2000 common rail Tester can used for testing following pumps: BOSCH CP1,CP2,CP3,DELPHI,SIEMENS, DENSO HP2 AND HP3. It has the functions to test the Electromagnetic and Piezoelectric injectors. It also can test 6 common rail injectors in one time. Function: 01.Testing every cylinder supply oil volume of the different speed 02.Testing every cylinder supply oil time of the static state 03.Testing variable speed device property 04.Testing electromagnetism Valve of distribute pump 05.Testing pneumatic Variable speed device property 06.Testing pressure boost compensate device property 07.Testing distribute pump supply oil pressure 08.Testing pump pressure of distribute pump 09.Testing minus property of pneumatic variable speeding device 10.Testing seal up of oil injection pump 11.Testing advance angle of advance device 12. Measure the biggest oil supply of the high-pressure common-rail fuel injector 13. Measure the start oil supply of the high-pressure common-rail fuel injector 14. Measure the back oil supply of the high-pressure common-rail fuel injector 15. Test track pressure 16. Test the injection pressure of the common rail injector 17. Test the spray cone angle of the common rail injector 18. Test the spray uniformity of the common rail injector 19. test the tightness of the common rail pump 20. Test the oil pressure of common rail pump 21. test the fuel supply of the common rail pump 22.the pump type can test: BOSCH-SIEMENS-DELPHI-DENSO 23.the injector can test: BOSCH-SIEMENS-DELPHI-DENSO