Образец покрытия Spray Gun ВСГК-2005S

ESGC-2005S Samples Static Spraying Gun It includes three parts: 1. High-voltage static spraying gun (Built-in high-voltage generator. Input 5-12V. Frequency 18KHz. Output 40-70kV. Negative polarity). 2. Controller (Static high-voltage controlling circuit: Output voltage 5-10V. Frequency 18KHz. Distance-voltage-current automatic tracing and adjusting circuit, set up the maximum discharge current of the spraying gun, guarantee the best electric charge of the powders. Pneumatic control: Control the opening and the closing of electromagnetism valves. Adjust the volume of the air and control the volume and the flow of the powders to make sprayed powders in continuous fog and guarantee the quality the coating.) 3. Powder supply system .It is comprised of venturi and vibration powder cup. Technical parameter: 1. Controller Input voltage: 110V/220V 50-60Hz Input power: 40VA Output voltage: 10V Output current: 0.5A Output frequency: 18 KHz Electromagnetism Valve Control Voltage: 24VDC (Max) Air inlet: 4.5bar Input voltage: 10V (Max) 2. High-voltage static spray gun Input voltage: 10V (Max) Frequency: 18 KHz Input current: 0.5A Output voltage: 70KVA Output current: 120μA Weight of spray gun: 590g Output powder: 0-250g/min 3. Powder supply system Powder cup quantity: 85g Input voltage: 3.6V Input current: 500μA Weight of cup: 115g