Оборудование для утилизации пластика

plastic recyclingis applied for: 1, raw material: wasted PE/PPfilm, bags, hard scraps 2. this production line includes ofcrushing, washing, dewatering for raw material above 3. the final products after this recycling production is clean PP/PE flakes 4. production capacity: 300kg/hr, 500kg/hr, 1000kg/hr The complete production line includes of: 1). Metal detector and separator 1 set (When metal is found, the cylinder works, discharging metal automatically) 2). SSD-300 Conveying belt for crusher 1 set (Conveying raw material to crusher) 3). SWP-800 Crusher (with water) 1 set (Crusher will cut the raw material into shape desired. When cutting is done, water will be put to washing the raw material) 4). MCX-300 Frication washer under crusher1 set (The rapid rotating speed can be applied to wash the raw material. Washing agent can be put as well) 5). JBX-300 Agitating washer 1 set (The water inside the container can be heated to 90 degrees centigrade. Washing agent of NaOH cab be added. After heating and mixing, the label, glue and oil can be separated) 6). GMC-300 High-speed frication washer 1 set (By means of centrifugal force, the label and sand will be thrown) 7). QXC-300 Washing tank 1 set (With clean water, the rising washing can clean the flakes of raw material) 8). LSG-300 Vertical centrifugal hydro-extracting dryer for hard scraps1 set (Centrifugal drying is applied to dewater for hard flakes) 9). WSG-300 Horizontal centrifugal dewater dryer for soft scarps1 set (Centrifugal drying is applied to dewater for soft flakes) 10). SSX-300 Drying, conveying system 1 set (Drying the flakes again) 11). FLQ-300 label separating device, 1 set (Removing the labels left with flakes completely) 12).Collection Hopper 1 set (There is mixing tool to protect the flakes from bridging) 13). Control cabinet 1 set