Номера для вентилятора градирни, FRP охлаждения башни

FRP Cooling Tower The principle of SFW series non-fan cooling tower According to the principle of hydrodynamics, the pressure of the cycle pump sprays the water from special nozzles. The fogged water together with the air moves up. During this motion the heat exchange between fogged water and air. The mixture of fogged water and air move into the diffuser, and then reach the top of the cooling tower. The fogged water and air is separated by the water collector. The hot air is exhausted out of the cooling tower. The collected water and cooling water drop into the filling. Heat exchange is taken once again between water and the air in the filling. Performance and features 1. Good cooling results The water is two cooled by air cording to working principle. 2. Water saving and environmental protection The cooling tower has no fan, and the structure of air outlet is different to traditional cooling tower. The velocity of air outlet smaller 60% than traditional cooling tower. So The loss of water smaller than 0.001. 3. Stability and lower noise The noise of traditional cooling tower results from air noise from rotation of fan, motor and rotation machine. SFW cooling tower has no rotation parts. Noise problem is thoroughly settled. The equipped noise elimination blanket decrease the noise of water drops. SFW cooling tower has no machine vibration because of no rotation parts.4. Economic and continence Maintenance of SFW cooling tower is easy because of no rotation machine. Service lift is over 20years. 5. Easy construction SFW cooling tower is mould design has easy construction. The tower can be combined according to space and user's requirements.