Нет 1 Этап освещения контроллер, ЛПВП 96/72/48 СН Ди

Dear stage lighting installer I am here introducing you the best dimmer rack in the world, this is the first one that can support fiber optical and RJ45, and also are the first one that can work with phase control module(leading edge, trailing edge), relay module, mix control module(phase control and relay control all in one), sine wave module (VST) in one dimmer rack. HDL Dawn series dimmer rack can accept 2 DMX and 2 Network DMX control signal, with report function including voltage and current of three phase, fan running status and channel parameter (output current, voltage, temp. and switch status). It is easy to monitor the system. On the other hand, HDL Dawn series can be monitored and controlled on running status by remote control device (such as channel preheat value, choose dimming curve and IP setting ) More advantages: fiber/network port, intelligent dynamic preheat, super power output, 10 curve and voltage remedy automatically. Output power of each channel is 6 KW, applicable in Theatre, TV Studio, multiple-function hall, and so on. Features a. Three models: HDL-D48 Plus,HDL-D72 Plus,HDL-D96 Plus b. useful interface with big LCD, English and Chinese version c. With simple lighting desk function inbuilt convenient for testing d. Support VST, phase control module, relay module, Mix control module in one Dimmer Rack e. with 10 fixed dimming curves and user default curve convenient for different kind of show. f. ON/OFF control value of channel can be settable From 1 99% g. Maximum output value settable h. Ethernet controller inbuilt for ART-net, CAN and status reporting j. control and status feedback via the Ethernet network k. Can Managed by multi-monitor devices such as PDA,PC etc l. Intelligent dynamic preheat saving energy m. output voltage stable automatically when the input voltage is changed n. power of load of per channel connect to dimmer rack test o. Two 12 bit process trigger card for backup q. Support HDL-Net, Art-Net and ACN protocol r. Optical coupler insulation technology for DMX signal input s. Fan speed adjust automatically according to the temperature of Dimmer Rack t. 96/72/48 Channel options, maximum output 6 KW each channel u. Dual DMX receiving v. Dual Net DMX receiving such as Art-Net w. HTP and priority for DMX signal y. support DMX First address and 512 patch z. the power of module detect for safety, sure 3kw and 6kw module can not confuse in the Rack Please also find following info on modules that can be installed in the dimmer rack (1) HDL-VST(sine wave module) a. Use IGBT for PWM control b. Sine wave output, very less noise c. built-in current sensor for over load protection and status reportc. built-in voltage sensor for short of load protection and status reportc. built-in temperature sensor for over heat protection and status reporte. Reporting function on channel control level, current, status of load, temperature, MCB g. two channel in one module ,3kw per channel (2)HDL- Phase control module Leading edge a. leading edge dimmer with 400us rise time corec. built-in current sensor for over load protection and status reportc. built-in temperature sensor for over heat protection and status reporte. Reporting function on channel control level, current, status of load, temperature, MCB g. two channel in one module ,option 3kw or 5kw per channel (3)HDL- relay module a. high performance relay for ON/OFF control b. good for none dimmer load c. built-in current sensor for over load protection and status reporte. Reporting function on channel control level, current, status of load, MCB g. two channel in one module ,option 3kw or 5kw per channel (4)HDL-dimming/relay module a. leading edge dimmer with 400us rise time core parallel connection with high performance relayb. save energy when relay workc. built-in current sensor for over load protection and status reportc. built-in temperature sensor for over heat protection and status reporte. Reporting function on channel control level, current, status of load, temperature, MCB g. two channel in one module ,option 3kw or 5kw per channel h. work mode selected by software More info, please visit www.smart-hdl.com