Несущая стальная проволока сетка сэндвич панели рамки

3D panelare the compositewall material made of 3-dimension mesh frame which is composed of cold drawn wire and heat maintaining core panel through welding. The mesh panel has the advantage of light weight, high streigh, heat preservation, sound isolation,anti-vibration, fast construction and increased floorage etc. The composite material can be used for the internal and external walls of the building, and heat preservation outside the building.As a load bearing material,3D panels can be used for the no more than four-storeyed building. It is a new, low manufacturing cost, composite wall material with wide applicability.Equipment composition: XC-1200/D Slanting bar spot welding machine; PW-1200/DSquare grille welding machine; GS 630 Steel wire rolling machine; SRC50A Air compressor and purfication plant; DN-35 Pneumatic re-welding machine; WC67Y-40/2000 Steel wire bender; EW-N5 Sprayingmachine for cement mortar (optional) Technical specification: 1. Dimension of 3D PanelL×W×T: 2450-6000mm×1200mm respective thickness of EPS panel 4070100mm 2. Production Efficiency 4.5s/step or 93 m2/h 3. Welding Intensity Pull-off force for each spot ≥400N 4. Main Equipment Dimension L×W×T 24000mm×1850mm×2650mm 5. Steel Wire Diameterφ3.0mmφ4mm