Нержавеющая сталь плитка отделка

Stainless steel tile trim: 1), JINFER-EDGE-03 is a finishing and edge-p:rotection profile for the outside corners of tiled surfaces. It is secured in the mortar bond coat beneath the tile and areveal that forms a symmetrically rounded outer corner with different size radius along the surface edge. 2), In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses. JINFER-EDGE-03 is particularly resistant to wear when used as edge protection. It may also be used as a stair nosing or transition profile. MaterialStainless steel 304, Stainless steel 316SurfaceBA and Satin finish. Colorful profile also avaliableThickness0.8mm, 1.0mm, 1.2mm, 1.5mm or according to customers drawing or sampleLength2.5M, 2.7M, 3.0M or according to customers requirementPlace of originalQingdao, ChinaPrice termCIF, CFR, FOBPayment termT/T or L/C at sightDelivery time20 days after your depositFeaturesIt is a finishing and edge-protection profile for the outside corners of tiled surface.It may also be used as a stair nosing or transition profile.The material are specially chosen for long life and safety.Surface finish and colors can be made as per your request.Colorful profiles, such as black, rose gold or upon your request is avaliable.Easy to install and clean, low maintenance cost.OEM is also avaliable in our company.PackingEvery item protected by protective film, then 20pcs in one carton,and then in steel creats for transport. Or according to customers requirement.