Мусоросжигательная печь

National Environmental Bureau HT/T18-1996"Standard for Pollution Control of small-scale incinerators" 1,Diesel combustion 2,Auto-ignition 4,Continuous Operation 5,Gas treatment high temperature + high temperature air swirl combustion+secondary combustion + cyclone dust collector+chimney 6,Temperature 600-900°C(Adjustable) 7,Sub-pressure design, no backfire 8,Average heat value 2500Kcal/Kg 9,Total area 3m×3m ,Machine area:L 2.6m×W 1.4m×H 2.8m(console chimney) rain shelter is usedSafety Index 1, Cooling detector for combustion chamber works before incinerator stopped operation Incinerator will stop only after temperature drops to fixed level 2,There is protective device between control cabinet and equipment for avoiding electric leakage. Insulation resistance of relay is not less than 24 MΩ when relative humidity reaches 85% and there’s also earth wire transmission leaked electricity Connected wires are protected by metal tube 3,Technical department will test the machine before it leaves the factory to ensure there’s no leakage