MR-144C пилообразной ЛИНТЕР

This cottonseed linter we made is used to strip the lint from gross cotton seed. As for design aspect, we adopt new technology, new process and new material to make the work property improve effectively, especially highlight its obvious advantages for the auto control cabinet and production efficiency . The machine can be divided into three specifications separately used to strip the first, second and third short lint; the second and third belong to air-flow type. In addition, this machine can be used as matching equipment with other cotton ginning machine ( the match ratio depends on the actual requirements) 1. Main technical parameters MR-144C Process capacity (kg/h) The first process capacity 3500-4500The second process capacity 1000-1500The third process capacity 750-1000Lint output ratio (%) The first lint output ratio 1-1.5The second lint output ratio 4-6The third lint output ratio 2.5-3.5Short-time lint output (kg) The first short-time lint output 0.29The second short-time lint output 0.35The third short-time lint output 0.21 2. Main technical parameters MR-144 CRoller of saw-blade (φ280-φ320)×1588.73(mm) The first of the tooth-shape angle of saw blade is 40°, the second and the third is 28°( tooth height 5-5.5mm) Saw-blade number 144 pcsSaw-blade interval 11.11mmMax. frame inclination 28-30°Discharge-strip clearance 2.8-3(mm)Blowing-rate at lint outlet 1.5-1.6 m3/s(non-load)Wind-speed at lint outlet 19-20 m/s(non-load)Power equipped 24.35 KWOverall dimension 2500×1800×1900(mm)Weight 2t 3. Motor model Y160L-4 15KW Y132M-4 7.5KW Y90S-4 1.1KW Y80M2-4 0.75KW