морские лебедка

Highwindlass is based on a set of efficient motor reducer, without specialized mount set. On one side of the anchor gear is gypsy wheel, a clutch is near the gypsy wheel. When the ship weigh anchor, the clutch combine with gypsy wheel, drive the torsional force of gear box to gypsy wheel. When drop anchor, either can through control box to control the falling speed of the anchor, or can separate the clutch, allow the anchor to quick and free falling. On the other side of the anchor gear is warpingbarrel, it is connected with axis, it always running with motor. And it also equipped with a electrical control box,which to control itself.The turn parts bearing of anchor gear use the copper of high quality. The has high transmission efficiency, low energy-consumption, very low operation noise. Main parts make with 316 stainless steel, polish by hand, refinement and beautiful in appearance, total weight only two-thirds of the same products. This equipment especially suitable for high-performance, high-speed yacht,business boat,speedboat and law boat Technical specifications a. Achoring Part Dia of Chain 11mm(AM2) Working load: 5.1kN Rated speed: 9m/min Overload pull: 7.7kN Holding load: 15.3kN Quan of wheel: 1 c. Warping part Warping pull: 3kN d. Motor part Type of el-motor Power 1.1kW(IP44) Rotating speed 1500rmin Voltage 220V, 60 Hz, 3 Phase