молоко пастеризатор

milk pasteurizer:HSTS pasteurizer, based on plate heat exchanger, over 90% heat regeneration, automaticflow divert valve, PLC automatic control with touch screen or digital control for pasteurized temperature. Any parts contact with product are made of 304 Stainless steel. The pasteuriser consists of plate heat exchanger, balance tank, pump, hot water circulation system (including: mixer of steam and water or steam-water plate heat exchanger, hot water pump, steam adjusting valve and water level control, etc) and computer system for pasteurisation program, CIP program, temperature control, this is used in heating and cooling raw material. The pasteuriser is usually used in the processes of milk, ice-cream, milk powder, fruit juice, beverage, etc which is sensitive to heat. The material is pumped to the plate heat exchanger, then been preheating, holding, heat energy recover, cooling and all this can keep the products original physical nature and taste. If the temperature is below the set temperature, it can be sensed by the temperature transmitter. A signal activates flow diversion valve and the material flows back to the balance tank, then the material is pasteurized again. The state of the pasteurization temperature is recorded on a disc of the recorder in process of pasteurization. Capacity:500L/H-30000L/H Tempraure of pasteurization and holding time: 73°C 15-30sec; 75°C 15-30sec; 85°C15-30sec; 95°C 300sec (for yougurt) 110°C15-30sec; 120°C 15-30sec;