Мини цилиндр

Mini Cylinder: Implementation components-cylinder- aluminum mini cylinder-MAL series-MSAL-U-25X80 including: 1)Standard pneumatic cylinder(CA2,CM2,MB Series) 2)Thin pneumatic cylinder(CQ2 Series) 3)Freely-installed pneumatic cylinder(CU Series) 4)Clamping pneumatic cylinder(MK Series) 5)Duplex pneumatic cylinder(CXS Series) 6)Stainless minipneumatic cylinder(MA,MAC,MSA,MTA Series) 7)Aluminumalloyminipneumatic cylinder(MAL,MSAL,MTAL,MALD,MALJ Series) MAD,MACD,MAJ,MACT,MAR,TN,SDA,SSA,STA,SDAD,SDAJ,SDAT,SDAW,MD,MSD, STM,SU,SUD,SC,SCD,OTHERS And so on. User Manual According to the operating load, select the suitable cylinder bore size. Before screwing the correct fitting in, make sure the thread ports and fitting are clean. Be aware of dust or fitting tap falling into the cylinder. It is suggested to use the medium lubricated by 40μ filter element. Under the high-temperature environment, use the high-temperature type cylinder. Under the low-temperature environment, take measure to avoid frozen. In order to prevent damaging the cylinder, test the cylinder. In order for the cylinder to achieve long service life, do not side-load cylinder. If the fitting were removed from the cylinder for a period of time, be sure to block the thread port with protecting cap to keep the dust away. ISO9001:2000, Compact design, light weight pneumatic automation system for small, start with low pressure, long life. Bore(mm) 1620253240Motion PatternDouble Action or Single ActionWorking MediumAirFixed TypeDouble Action /LB Type /FA Type /SDB TypeWorking pressure range(kgf/cm²)1 9.0Guaranteed withstand pressure(kgf/cm²)13.5Temperature Range(Celsius)0 70Speed Range(mm/s)50 800Buffer TypeBuffer spacerJoint Pipe BoreM5×0.8G1/8"