Мини-экскаватор

CARTER MINI EXCAVATOR (HYDRAULIC CRAWLER EXCAVATORS) SPECIFCATIONS HYDRAULIC SYSTEM(JAPAN KYB) CMMINS A2300T Power 40KW/2200RPM, a guarantee of super power Excellent performance even work in plateau or at high altitude In conformity with the EU III emission control regulations Imported hydraulic system with dual pump and dual circuit Guarantee for 3 yrs under normal use and maintenance Imported hydraulic components, Japan made KYB main pump, multi-circuit valve, swing motor, walking motor, South Korea made gasoline tank On-line digital monitoring and control system GPS satellite(optional)and remote diagnose system(optional) Cold&warm air conditioner supply under different kinds of weather conditions Light and handy pilot operating system Rubber or steel pedrail SPECIFCATIONS Operating weight 4.200 KG Travel speed 4.4/2.7km/h Bucket Capacity 0.17m3(SAE) Tracking force 34.1kn Engine power 40KW/2.200RPM gradeability 300(58%) Swing speed 11RPM Bucket digging force 23.7 kn Ground Pressure 38.7KPa Arm digging force 20.4 kn Dimensions Boom Length 2.650 mm Arm Length 1.450 mm Upperstructure width 1.600 mm Undercarriage width 1.750 mm Overall Height with cabinet 2.455 mm Rear swing radius 1.600 mm Clearance under counter weight 585 mm Tumbler Distance 1.710 mm Ground clearance 350 mm Overall length for transportation 5.500 mm WORK RANGE MAX digging radius 5.530 mm MAX digging radius at ground lever 5.420 mm MAX digging depth 3.405 mm MAX vertical wall digging depth 2.900mm MAX digging height 5.030 mm MAX dumping height 3.410 mm MAX dozer cutting depth 380 mm MAX dozer lifting height 255 mm HYDRAULIC SYSTEM(JAPAN KYB) -------------------------------------------------------------------------------------------------------------------------------- An excavator is an consisting of an articulated arm (boom, stick), bucket and mounted on a (a rotating platform, like a ) atop an undercarriage with or . Their design is a natural progression from shovel Usage Excavators are used in many ways: Digging of , holes, Material handling Brush cutting with hydraulic attachments General grading/landscaping Heavy lift, e.g. lifting and placing of pipes , especially, but not only Driving , in conjunction with a ConfigurationsExcavators come in a wide variety of sizes. The smaller ones are called a mini-excavator or . One manufacturer's largest model weighs 84,980 (187,360 ) and has a maximum bucket size of 4.5 m³ (5.9 yd³). The same manufacturer's smallest mini-excavator weighs 1470 kg (3240 lb), has a maximum bucket size of 0.036 m³ (0.048 yd³) and the width of its tracks can be adjusted to 89 cm (35 inches). Another company makes a mini excavator that will fit through a doorway with tracks that can be adjusted to only 70 cm (28 inches) wide.Excavator attachmentsIn recent years, hydraulic excavator capabilities have expanded far beyond excavation tasks with . With the advent of hydraulic powered attachments such as a , a or an , the excavator is frequently used in many applications other than excavation. Many excavators feature quick-attach mounting systems for simplified attachment mounting, increasing the machine's utilization on the jobsite. Excavators are usually employed together with and . Most wheeled versions, and smaller, have a small backfill (or dozer-) blade. This is a horizontal bulldozer-like blade attached to the undercarriage and is used for pushing removed material back into a hole. Prior to the 1990s, all excavators had a hang over, or "conventional" counterweight that hung off the rear of the machine to provide more digging force and lifting capacity. This became a nuisance in tight turn areas - the machine could not swing the second half of its cycle due to restricted turn radius. In the early 1990s The Komatsu Engineering Company launched a new concept excavator line that did away with the "conventional" counterweight design, and so started building the world's first tight tail swing excavators (PC128.PC138,PC228,PC308). These machines are now widely used though out the world.