Металл-Бонд Алмазный инструмент

Metal-Bond Diamond tools Diamond Fickert was initially used for ceramic tiles polishing by MONTE-BIANCO in 2007 after our several years of consistent and devoted research and development. This product has been highly approved by our customers according to their two years of practical use. Compared with traditional silicon carbide abrasives, this product’s advantages can be summarized as more efficient, energy saving and lower consumption. Diamond Fickert is the latest contribution made by MONTE-BIANCO to the technical upgrade and reform in ceramic tiles processing field. The development of this product is also one good example of MONTE-BIANCO FOLLOWING THE Scientific-Development Sight of ‘Energy save, lower consumption and environment protection’ which is highly promoted by Chinese government now.Compared with traditional silicon carbide abrasives, the advantages of Diamond Fickert can be summarized as following:1. Long working lifetime, which is 80 to 150 times longer than traditional silicon carbide Grinding efficiency is increased by more than 50%, the electricity consumption of polishing spindles is decreased by more than 40% and the polishing speed is increased by more than 20%.2.Maintenance cost of polishing spindle and belt is reduced by more than 30%.3. Waste residue caused by grinding is reduced to even less than 1% of that produced by traditional silicon carbide abrasives, which can be nearly neglected.4.Operator’s workload is visibly reduced and labor cost is saved.5.Required abrasives transportation quantity is reduced very much so as to save the related social resources such as energy and logistics etc.According to different bond used , it is classified into Metal-Bond Diamond Fickert and Resin-Bond Diamond Fickert.