Мелкопузырьковой аэратор часть

The Ecologix company is a manufacturer specializes in producing aerators with outstanding performance and excellent techniques of diaphragm forming and perforation. Its products are the mature environmental protection products in the fine bubble aerator market and consumes less energy than the alike products. Ecologix uses high-tech production equipments to extend the useful life of its products and to lower the maintenance costs of the products. Its diaphragm aerator has been widely used in municipal sewage treatment plants, industrial wastewater treatment plants, chemical factories, pulp and paper mills, tanneries, catering industry, food industry, slaughter industry, textile industry, stock breeding industry, and aquaculture industry. The materials used for the disk diaphragm and tube diaphragm of the Ecologix aerators are EPDM, StantopremeTM, VitonTM and ect. Demanded by the wastewater treatment market, the ultraviolet protection agent is added to the resinized rubber to prevent corrosion by chemicals, weathering and aging. The special diaphragm material ensures that the aerators can be widely used in the municipal sewage treatment, industrial wastewater treatment, tannery wastewater treatment, paper mill wastewater treatment and fish pond oxygenation. The supporting structure of the Ecologix aerator is made of glass fiber reinforced nylon, FRPP or ABS, which can be used safely in the acid environment. Ecologix offers a variety of fine bubble aerators with high performance and low maintenance costs, which produce fine and uniform bubbles. The oxygen transfer rate is high. Compared to the surface aerator, coarse bubble aerator, jet flow aerator, ceramic aerator or stainless steel aerator, the products can be used in the oxygenation systems with a variety of selections for tap water factories, wastewater treatment plants and fish ponds. The pipe clamp seats and fixing devices made of stainless steel, PVC and other thermoplastic materials are the ideal installation devices, which can save labor and installation costs. It is also convenient for the alternation and repair of the original aeration system. Intermittent operation consumes a large amount of oxygen and its air flow varies in a wide range. While at working, fine bubbles of 1-3mm are produced continually from the micropores of the diaphragm, which increases the contact area of the bubbles and the wastewater. As a result, the oxygen transfer rate is greatly improves. When it stops working, the diaphragm contracts and the micropores will be closed. At the same time, the diaphragm will cling to the supporting pipe closely and the unperforated part of the diaphragm will seal the air vent. The double sealing design can effectively prevent the water/wastewater entering into the aerator or the aeration piping system.