МЭК Твердые Черный резиновый кабель

Rubbercableis suitable for using in power transmission lines with rated voltage up to and including 450/750V. Our products are strictly in accordance with IEC standards, If you could accept the IEC standard products,Please tell us what type of cable you need? Or, please tell us more detailed information, so that we can giveyou the corresponds quotation. RubbercableModel, core number, nominal cross-section and the description:Number of cores*cross-sectional area(mm2)conductive coreroot number/diameterMaxaverage diameter(mm)Minaverage diameter(mm)20°c copperconductor resistance(Ω/km)20°c tinned copper conductor resistance(Ω/km)reference weight YQ(kg/km)reference weight YQW(kg/km)2*0.316/0.156.64.669.21.23031.52*0.528/0.157.25.039.040.04345.53*0.316/0.157.04.869.271.23638.13*0.528/0.157.65.239.040.27477.0 Min. Bending Radius For InstallationITEMSINGLE CORE CABLETHREE-CORE CABLENO ARMORWITH ARMORNO ARMORWITH ARMORMin. Bending Radius for Cable Installation20D15D15D12DMin. Bending Radius Near Junction Box & Terminal Cable( Bending Shall Be Controlled Carefully )15D12D12D10D Storage, transportation 1. Cable storage place should be dry and ventilated.2. Cable tray is not allowed to place horizontally. 3. When storage avoid humidity and moisture into the cable core, both ends should not be exposed to the air, uses cable caps to take the ends enclosed. 4. The cable tray is not allowed to place horizontally when transportation, as to avoid crushing cables. 5. Lifting spreader should be used when lifting cables, pushing from the vehicle is strictly prohibited. 6. Avoid the moisture into the cable core when transportation.