маточной для инъекций

Y-8099 is produced by high density carbon black and grade one recycled polyethylene + virgin polyethylene as the carrier. Product characteristics: high density carbon black, strong adaptability, with very good dispersed and suitable for blowing film, also suitable for normal injection, granulation, pipe, sheet casting and so on. Carbon black percentage is 50% pigment. Appearance: 2.5*3.0mm\3.0*3.0mm black grain. Application: special for blowing film, also suitable for normal injection, granulation, pipe, sheet casting and so on. Proposed consumption: 1%-2% (Determined by product characteristics and requirements). Technical parameter: Bulk specific weight: 25°C 700kg/mm2 Melting index: 20g/10min Melting point: 120-180°C Water content: <0.02% Anti-Temp: 280°C Gravity; 25°C 1200 kg/mm2 Package and storage: 25kg/package. KP compound bag, PP bag .and stored in a dry and ventilated place. Remark: the above data is not used for specific technical specifications and the basic Experimental data is only for reference of performance of the product.