Marmocelain, керамогранит

Stock tiles, Polished tiles, floor tiles. 1. This is the best tile for hotel, airport, Department stores, Residential buildings, big project etc. 2. Packing details: a) 400*400MM 10pcs/ctn, 30kg/ctn, 1.60Sqm/ctn; b) 300*600MM 8pcs/ctn, 30kg/ctn, 1.44Sqm/ctn; c) 600*600MM 4pcs/ctn, 30kg/ctn, 1.44Sqm/ctn; d) 800*800MM 3pcs/ctn, 50kg/ctn; 1.92Sqm/ctn; e)1000*1000MM 2pcs/ctn, 60kg/ctn; 2.00Sqm/ctn 3. Delivery Time: 15days 4. We have many different color and different design in this series. Please kindly check our website. 5. Our price is very competitive with very good quality; 6. We have CE, ISO9001, Soncap, SASO for most of our tiles. 7. It's available in polished, super glossy, matt finish, etc. 8. Below are theinspection report: Inspection ReportTest Basis on ISO13006Item No.: 6307Test DescriptionTest MethodISO13006 BIaTest ResultLimitSurface (CM2) ss>410Length and Width The manufacturer shall choose the work size as follows: a) for modular tiles in order to allow a nominal joint width of between 2mm and 5mm1); b) for non-modular tiles so that the difference between the work size and the nominal size is not more than ±2%(max. ±5mm). The deviation, in percent, of the average size for each tile (2 or 4 sides) from the work size (W). ISO10545-2600±1.0600.1 600.4The deviation, in percent, of the average size for each tile (2 or 4 sides) from the average size of the 10 test specimens (20 to 40 sides).ISO10545-2±0.5%/Thicknessa) The thickness shall be specified by the manufacturer.ISO10545-2-/b) The deviation, in percent, of the average thickness of each tile from the work size thickness.±5%/Straightness of sides (facial sides) The maximum deviation from straightness, in percent, related to the corresponding work sizes. ISO10545-2±0.2%-0.03 +0.04%Rectangularity The maximum deviation from rectangularity, in percent, related to the corresponding work sizes. ISO10545-2±0.2%-0.02 +0.03%Surface flatness The maximum deviation from flatness, in percent:a) central curvature, related to diagonal calculated from the work sizes;ISO10545-2±0.2%-0.04 +0.04%b) edge curvature, related to the corresponding work sizes;±0.2%-0.04 +0.06%c) warpage, related to diagonal calculated from the work sizes.±0.2%-0.05 +0.04%Surface QualityISO10545-2A minimum of 95% of the tiles shall be free from visible defect that would impair the appearance of a major area of tilesConformedWater absorption Percent by massISO10545-3≤0.5% individual maximum 0.6%0.23% 0.16 0.30%Breaking strength, in Na) thickness ≥ 7.5mmISO10545-4Not less than 13001607.4N b) thickness < 7.5mmNot less than 700/Modulus of rupture, in N/mm2 Not applicable to tiles with breaking strength ≥ 3000 NISO10545-4Minimum 35 Individual minimum 3239.6MPa 38.0 43.6MPa