LS400 винтовой конвейер Гибкий

LSSeries screw conveyor1. Operating principle LS type screw conveyor is a continuous conveying equipment. . Used to transport all kinds of powder and small pieces of material.Such as Coal, cement, sand, coal, grain, etc. It will use revolving the screw the material which will transport along the fixed cabinet to pass carries on the transportation work. 2. Features: Structure is simple , operation safety is convenient, the upkeep is not very complicated, the cross section external form the dimension is not big , easy to carry out load-off on some location, confinement machine shell cover may reach fairly good hermetic sealing. 3. Application fields: The machine may be used for branches such as chemical industry , building material , machinery , coal , metallurgy , light industry , grain , medicine , traffic , water and electricity broadly, Being used to transport all kinds of form of powder and small piece material. Be inadvisable to transport the big viscidity packing material or large piece of material easy to go bad. This enables the installation slightly tilted, the maximum tilt angle: less than or equal 20 °, the working environment temperature: -20 °C 50 °C temperature materials transportation: less than 200 °C. 4.Main technical data: Standard spiral diameter (mm) 150 200 250 300 400 500 600 Screw pitch(mm) 150 200 250 300 400 500 600 Screw shaft standard RPM (r/min) 20, 30 ,35, 45, 60, 75, 90, 120, 150, 190 For maximum throughput coal Screw axis maximum rpm (r / min) 190 150 150 120 120 90 90 Maximum throughput (t/h) 4.5 8.5 16.5 13.5 54 79 139 Clay Screw axis maximum rpm (r / min) 90 75 75 60 60 45 45 Maximum throughput (t/h) 4.8 9.5 18.6 25.8 60.8 39.3 153 sand Screw axis maximum rpm (r / min) 75 60 60 60 45 45 35 Maximum throughput (t/h) 4.6 8.7 17 29.5 52 102 137