лифт световую завесу

CSN515Detailed Product DescriptionElevator light curtain safety edge a.154 beams b. 32 pairs of diodes c. Detection height: 25 1860mm d. CE certificatesElevator light curtain safety edgeNingbo ANT Electronic Co., Ltd. is a manufacturer specialized in the production of industrial remote control, crane load cell and elevator parts, such as elevator weighing load cells, elevator door detector, photoelectric sensors and other elevator sensors. The company is located in Jichang RD, Ningbo, China.ANT light curtain system includes the transmitter, receiver, power supply box and cables. When the power is turned on, it generates infrared screen between two doors. If any ray of infrared is blocked by any object or person, the doors stops closing immediately and open to protect people.ANT light curtain, with 32 pairs of diodes, 154 beams, 25-1860 detecting height, scan the range line by line and detect 0 5.0m moving doors. ANT light curtain offer you the safest door protection for the elevators.CSN515/ES3000+ Items Technical parameters Items Technical parameters Beams number 94 (ES3000+)/154(CSN515) unfocused beams(infrared) Current consumption <100mA Sensor number 32 pairs(refer to pictures) Power adapter MODEL258 or 368 Sensor interval 52.5/58.8mm(refer to pictures) Protection grade IP 54 standard Beam center points interval 10.5mm/11.5mm(refer to pictures) Ambient temperature 0°C +70°C Scanning form Line by line Storage temperature -40°C +80°C Response time 10 50msec(relating to detecting points of scanning cycle) Size 12*22*2000/1820mm Highest beams spot 1655mm(CSN515)1728mm(ES3000+) Installation 5 screw fitting holes with accessory(refer to pictures) Detecting range 0 6.0m moving door Indicator Power(green LED) Light lmmunity 80,000lux(visible light) System fault/beams blocked(orange LED) Allowable deviation angle ≤10° Shell material Aluminum alloy surface of anodizing (black) or matt spray plastic(black) Allowable deviation position Vertical:±50mm Horizontal: ±5mm Shell cover (light filter) Embedded installation of infrared penetrating for blocking off non-infrared Protecting states Cable fault Power fault Authentication CE(EMC) Working voltage 12V(minimum 8V,maximum 30V) ItemsTechnical ParametersBeams Number154 beams (infrared)Sensors Number32 pairs (refer to pictures)Sensors Interval58.8 mm (refer to pictures)Beams Center Points Interval10.5mm/11.5mm (refer to pictures)Scanning FormLine by lineResponse Time61msec(relating to detecting points of scanning cycle)Detecting Height25-1860mmDetecting Range0 5.0m moving doorLight Immunity80,000lux(visible light)Allowable Deviation Angle≤10°Allowable Deviation PositionVertical: ±10mm/7°Horizontal: ±5mm/5°Protecting StatesCable faultPower faultCurrent ConsumptionLess than100mAPower AdapterMODEL258 or 368Protection GradeIP65 standardAmbient Temp.-20°C +70°CStorage Temperature-40°C +80°COther functionsOne transmitter is shielded after 120s’ blockingIndicatorPower (green LED)System fault/beams blocked(orange LED)Shell MaterialAluminum alloy surface of anodizing (black)ormatt spray plastic(black)Shell Cover (light filter)Embedded installation of infrared penetratingfor blocking off non-infraredAuthenticationCE(EMC)Working Voltage12V(8V 30V)Power supply220VAC or 24VDC