Лазерная маркировка руководитель (лазерный сканер / Оптический сканер

A whole laser marking head (or called laser scanner) consists of two scan mirrors, two galvanometers (or called galvo-scanner motor) & drive cards, a XY mount, a scanning lens (f-theta lens), an interface card (or called D/A card), a set of marking software and a DC power supply. Two types of scanning optics for CO2 and Nd:YAG lasers are available. Remark: The marking field of our standard marking head is 105x105mm (CO2 laser) or 110x110mm (Nd:YAG laser). Other mark fields are available upon request. In fact, the marking field depends on the f-theta lens. Thus you may prepare a few f-theta lenses with different marking fields for your various applications. The focused beam diameter is theoretical calculation for reference only and actual focused beam diameter depends on beam expander, f-theta lens and laser. The DC power supply for the above marking heads is DCBJ-80-25-2. Its input voltage is 220VAC (default) or 110VAC upon request. The above laser marking heads can be used on-fly marking via the software LMC-1F.