лампа индукции --factory lamp015

Structure and operating principle of electrodeless lamp The HFED comsists of bulb,power coupler and high-frequency generator.The power coupler is built inside the bulb ,connecting the high-frequency generator through feeder line.The coupler induces and couples high-frequency electromagnetic energy created by the generator into the bulb,which makes the air inside the bulb cumulatively ionized into plasma .Excited atom of the plasma while returning to ground state will spontaneously radiate ultraviolet light that will invigorate the phosphor powder on inner walll of the bulb to give off visible light. Specifications : Size:D500mmxH300mm Rated voltage:AC220V/50HZ Frequency:2.65MHZ Suitable light source:35w--165w RA>80 Color temperature:2500k--7000k Luminous flux:5100--13000LM power factor:more than 0.98 waterproof class:IP 45 Description: 1.Lamp and ballast are desinged intergratively,beautiful and apperance light .easy to install. 2.Steel safety glass, high temperature resistance,impace resistence 3.Die-casting molding aluminumn shell to prevent corrosion. 4.Certification : CE/CCC/ISO9000--2000 Place to be used: Industrial factory buildings,market ,mall and so on. Notice of application: 1.The high-frequency generator should be matched to use with our bulbs of the same power . 2.The operation ambient temperature of high-frequency generator should be lower than 60C 3.duringoperation ,temperature of the coupler base inside the bulb is relatively high.It is necessary to install radiator or aluminum plate.Area of the aluminum plate:>200 square meters . 4.The voltage of output terminal of the high-frequency generator is about 1KV.Forbidden to touch it in operating state. 5.The length of bulb high-frequency connecting line can not be randomly cut short or extended: otherwise it may affect normal operation of the electrodeless lamp.