Ламинатор

Laminating machine presses the decoration paper, PVC template or wood slice onto the wood-based panel (including calcium silicate board, particle board, plywood and MDF). Main features1. Make use of PLC human-computer interface control, safety and reliably, and the pressure curve control accurately.2. Hot-press frame with reasonable design is used with, is welded using the carbon dioxide gas from the domestic well-known & good-quality stainless and process the three working-faces on Plano miller.3. Adopts the secondary recycling control system for controlling the temperature of top and bottom hot plate.Main Technical Data 1 Finished size of normal lamination (8 40)×1830×2440mm 2 Pressing cycle According to technological request 3 Specific pressure 16000KN 4 Unit pressure ≤35kg/cm2 5 Size of heating plate 2000×2600mm 6 Daylight opening: 280mm 7 Main cylinder(diameter×stroke): 260×280mm 12 units 8 Pressure of hydraulic system: ≤25MPa 9 Temperature of heating plate: ≤210 10 Temperature control of heating plate: Digital indicator (Include secondary recycling temperature control system 11 Temperature controlling of heating plate: ±1 (Upper and Lower heating plates are controlled separately) 12 Working method of loading machine: Belt loading 13 Speed of loading/unloading machine: 30m/min 14 Controlling system of whole wires: PLC 15 Closing time of the press: ≤2s 16 Lifting time of the press ≤2s 17 Pressing time of the press 1.5s 17 Arrangement of energy 30×104 kcal/h 19 Heating media of heating plate Thermal oil (Boiler prepared by user self) 20 Net weight of the equipment 64800kg 21 Size of the line(Length×Width×Height) 24100×10700×3950mm (Above the ground) Economic and technical parameters 22 Total power 66kW 23 Compressed air arrangement 1.2m3/min 0.6Mpa (Compressed air prepared by user self) 24 A Short Cycle Process 55s ,per keeping pressure time 30s