Ламинатор

Laminating machinepresses the decoration paper, PVC template or wood slice onto the wood-based panel (including calcium silicate board, particle board, plywood and MDF) Main features 1. Make use of PLC human-computer interface control, safety and reliably, and the pressure curve control accurately. 2. Hot-press frame with reasonable design is used with, is welded using the carbon dioxide gas from the domestic well-known & good-quality stainless and process the three working-faces on Plano miller. 3. Adopts the secondary recycling control system for controlling the temperature of top and bottom hot plate. 4.be matched the cupula conveyor for the foundation board, positioning accuracy. also can be matched automatic trimming, turning board for cooling, automatic stacking, inspection and so on Technical Data 1.Finished Specification: (8 40)×1220×2440mm 2.Pressing Cycle: According to technological request3. Specific pressure: 12000kN4.Unit working pressure: ≤40kg/cm25.Size of heating plate: 1400×2600mm6.Daylight opening: 280mm7.Main cylinder(Diameter×stroke):320×300mm 6 units8.Oil pressure of hydraulic system:≤25MPa9. Temperature of heating plate: ≤210 10. Temperature control of heating plate: Temperature control meter by digital settingWith secondary cycling system 11. Temperature control precision of heating plate: ±1 (Upward and downward heating plate controlled separately) 13. Working of loading device: Belt loading 14. Speed of loading device: 30m/min 15. Control precision of positioning: ≤2 16. Drive mode of loading device: Service drive 17. Control mode of whole wire: PLC 18. Closing time of press: ≤2.0s 19. Lifting time of press: ≤2.0s 20. Pressing time of press: 1.5s 21. Arrangement of energy: 0.24MW(20×104 kcal/h) 22. Heating media of heating plate:Thermal oil (Boiler prepared by user self) 23. Total power: 110kW 24 Arrangement of compressed air: 1.2m3/min 0.6Mpa (Compressed air prepared by user self) 25. Wind quantity of ash separator of brusher: 10000m3/h (Ash separator prepared by user self) 26. Net Weight: 110000kg 27. Size of the line (Length×Width×Height):13000×13000×4200mm(Above the ground)