Крышка сцепления

Clutch cover is a metal disc, through the pressure plate and clutch spring clutch friction plates tightly squeezed, makes the engine power to the gearbox; in the clutch, the clutch lever from the top of the clutch pressure plate clutch friction plate, can not transfer the engine power handed transmission, when the clutch spring failure or wear of the clutch friction plate, the clutch will slip, engine power can not be fully passed to the transmission, symptoms are: engine speed is high, but the car run faster. Clutch is located between the engine flywheel and transmission. Active part (clutch pressure plate and clutch cover) after the end fixed in the flywheel, the driven part (friction plate) is located between the flywheel and pressure plate and the spline hole through the center of the first shaft connected with the transmission. Compression part of the pressure plate is located and between the clutch cover, the friction plate with its elastic tightly sandwiched between the flywheel and pressure plate, the main advantage of the friction torque to the driven part of the engine output torque transfer. Separation of bodies covered by the installation of the clutch and pressure plate separation on the lever, set in the first transmission shaft bearing cap sleeve and installation of bearings on the flywheel housing on the composition of the fork. Fork or by mechanical devices and the hydraulic mechanism of the clutch pedal connected to the cab. Bonding state is often in the clutch transmission torque, and only stepped on the clutch pedal, separate agencies will pressure after hours separate shift and friction plate and showed separation. At this point interrupts torque transmission can be carried out, such as starting, shifting, braking other items of processing operations. When the vehicle transmission system is overloaded, the clutch starts slipping, the transmission system to achieve overload protection. The role of clutch pressure plate is: pressure plate and flywheel connected together by screws, clutch pressure plate and flywheel is located between the needs of the engine when the vehicle driving power, the clutch pressure plate to firmly press and hold the engine power transfer to the transmission system to drive the vehicle; when depress the clutch pedal to the separation of the pressure plate bearing paw pressure compression spring, the clutch pressure plate disk and separation of generation gap, to achieve separation of the role.