Кремнистой стали линии непрерывного отжига

This line will do the degrease for no-orientation silicon iron, and undertake decarburizing annealing and recrystallization annealing in the protective gas atmosphere so as to decrease the carbon content into the preset range, result the crystal grain growth, eliminate stress and coat insulating layer. Main parameter: Raw material: middle, low and no silicon cold rolled hard coil with silicon content below 2% Carbon content: 50-70 ppm Strip thickness: 0.35-0.65 mm Strip width: 400-600 mm Product: middle, low and no silicon electric iron cold rolled coil with silicon content below 2% Representative specification: 50W470-50W600 50W800-50W1300 Quality standardGB/T2521-1996 Product strip carbon content: ≤27ppm The technics flow shows as follows: Coil loading→ payoff reel→ thickness measurement → crop shear→ welding→ (entry accumulator→ ) degreasing (alkali spray + alkali scrub+ electrolytic degreasing → water cleaning → dryer)→ decarburizing annealing → cooling→ insulating coating → sintering → air jet cooling →(exit accumulator→) surface inspecting → cutting→ tension reel Main feature: (1) Adopts international advanced and reliable electric iron decarburizing process technology. (2) A cleaning section will be set, which combines chemical degreasing and electrolytic degreasing, to improve the degreasing effect, clean the oil stain, and iron dust of the strip surface. (3) Adopts continuous decarburizing annealing furnace, using radiant tube and electric resistance indirect heating technique, the heating can be easy controlled, and it will get the uniform heating and good strip shape; (4) In the furnace, adopts protective gas recycle jet cooler and frequency conversion adjustment, which can get the effect of quick and uniform cooling. (5) Uses light ceramic fiber as the inner lining of the annealing furnace, which has the advantage of quick furnace building and low thermal inertial etc. (6)Adopts advanced insulating coating technology. (7) The CPC, EPC will be the imported equipment, which further ensures the steady produce of the line.