Корпус фильтрации 214

Standard Features: Housings available in carbon steel, 304 or 316 stainless steel and polypropylene Pressure ratings in 100, 125, and 150 psi Clean and dirty/gage port connections O-ring seals: Buna, Ethylene Propylene, Viton®, and Teflon® Encapsulated Viton® ASME code stamp available on selected models Flanged or threaded connection sizes from 2-inch through 10-inch Covers are o-ring sealed and easy to remove Leg assembly (excludes CR8) Multi-cartridge units are offered in the low profile design, for quick and easy cartridge removal A single 700 Series cartridge unit will out perform 40 standard wound or 10 pleated cartridges, reducing maintenance. A decrease in cartridge use, reduces labor, inventory, worker exposure and disposal costs. Flow rates and contaminant holding capacities vary depending on micron size. A single cartridge element holds as much as 20 pounds of contaminant and flows to 100 gallons per minute. The labor-intensive v-posts and spring seals are eliminated and cartridges are easily removed, requiring no special tools. Elements are approximately 6.25-inch diameter and 35-inch length. The 700 series filter housings contain one, four, seven, or eighteen cartridges, with a 226-end cap design.