KL-280 Волоконно-оптический сварочный аппарат

Features: 1,Single X or Y view and X & Y view simultaneously 2,Fiber core can be display clearly 3,Auto check quality of cleaved end face 4,Small bulk and light weight (bulk: 150mm x150mm x160mm ; weight :3.52kg) 5,Inner light to set fiber at night 6,Simple operation menu 7,9 seconds splice time and 30 seconds heat time 8,Auto select best splicing program 9,Storage of splice result: 5000 results &3 parameter per result Specifications: Applicable fibers: SM MM DS NZDS Fiber cleaved length: 8-16mm Fiber diameter: Cladding diameter 80-150um;Coating diameter 100-1000um; Fiber Count: Single Fiber aligning method: Core aligning Retum loss:>60dB Actual average splice loss: 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS) Splicing mode: auto Typical splicing time: 9 sec ,with standard SM fiber Splicing mode: 12 (templet), 188(user) Tube typical heating time: 30 sec Protection sleeve length: 60mm, 40mm Storage of splice result: 5000 results, 3 parameter per result Tension test: 2N Fiber magnification: 400X (X or Y view), 200X (X and Y view) Electrode life: 2500 No. of splice/heating with battery: Typical 130 cycles Image change over: The fiber image can be turned over Display screen: 5 inch color LCD monitor Terminal: RS232 Power supply: AC 100-240V with AC adapter inner Li-battery (6600mAH) Operating condition: 0-5000m above sea level, -10-50’C Max wind velocity of 15m/s Dimension: 150mm(L)X150mm(W)X160mm(H) Weight: 3.52Kg including battery