Хонинговальные камни, Хонинговальные инструменты

Honing is defined as a precision honing method to carry out grinding work of a workpiece in contact with the surface of honing stones in an abundance of coolant while simultaneously providing the honing stones with rotating and reciprocating movements and also applying pressure on the inner surface of a hole. With the honing stones brought into contact with the work piece reciprocating and pressurizing (expanding) one or a few bar-shaped honing stones fitted intoa body called mandrel (or honing head).Accordingly. unique cross-hatching(mesh pattern) is formed on the honed surface.Diamond Honing Stone-Avery hard abrasive grain, which is essential to the honing of Carbide, Cast Iron, Glass, Brass, Bronze and Ceramic materials. Designated by the letter "D" in stone code.CBN Honing Stone-A man-made abrasive(cubic boron nitride) especially usefully for honing the tough Alloy Steel, Tool Steel, Die Steel, Harden Steel and other abrasive resistant materials. Designated by the letter "N" in stone code.Bore Types and Selection GuidesOpen holes with no interruptions Select a honing unit with stone length2/3 to 3/2 times bore length. If honing units shown have stone length too long or too short, please contact usOpen holes with keyway or splines Bores with interruptions such as these require keyway honing units, Stone should be 2/3 to 3/2 times bore length. For such bores, special-purpose stones should be used.Open holes with tandem landsTandem bores require a stone length at least twice the distance, special honing stone should be usedBlind holesSelect a Honing units with stone length 2/3 times bore length, if the honing stone length too long, please don’t shorten it. Be sure shank is long enough to permit stone to reach bottom in hole. Honing Stone Code Explanation Chart K12 NM 5 5 K12- SeriesNM- Abrasive Types5-Grit size5-HardnessAbrasive Types: A-Aluminum OxideC,J.- Silicon CarbideDM,DR,DV-DiamondNM,NR- CBN/BorazonGrizt Size 1- 70 8- 4002- 80 9- 5003- 100 0- 6004- 150 80- 8005- 220 90- 9006- 280 10- 10007- 320 00- 1200Hardness 1- Soft3- 5- 7- 9- 11- 13- 15- Hard