Kangda Красный Силиконовый герметик RTV

This productforms to any shape instantly and cures fast. After curing, it resists cracking, shrinking and migration caused by thermal cycling. Also, it can work up to 260°C and has good resistance of oil, water, anti-freeze and transmission fluid. So it's widely used to seal timing chain covers and other different covers. Technical Data: Acidic Silicone Neutral Silicone Appearance Exquisite and well-proportioned past, no agglomeration, no gelling and no surface solidify Sag ≤2.5 mm ≤2.5 mm Tack-free time ≤15 min ≤15 min Tensile Strength ≥1.80 Mpa ≥1.20 Mpa Break Elongation ≥250% ≥350% Curing Speed 24 hours 24 hours Shores Hardness 35-45 35-45 User Guide: 1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease; 2. Remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size; 3. Apply continuous, uniform 1 4mm bead around perimeter of one surface. Completely surround all bolt holes; 4. Wait about 10 minutes for silicone to skin over. Then reassemble the parts. 5. Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond.Notes: A) Leave thickness for gasket when reassembling; don't over-tighten the bolts. B) Sealant releases acetic acid (vinegar-like odor); Used with adequate ventilation. C) Replace the cap after use