Kangda ABS Клей (2138)

KangDa ABS adhesive is special for bonding ABS, AS materialsHigh bonding strength after curingFast curing speed, good water resistance, nontoxicIt can also be used to bond rigid PS, PVC etc. Technical data: Item No.AppearanceViscositySolid contentPeel/Shear StrengthWD2102brown-yellow liquid2.0 – 3.0 Pas≥43%Peel Strength: ≥25 N/2.5cmWD2104Clear or light yellow liquid2.0 – 3.0 Pas≥43%Peel Strength: ≥25 N/2.5cmWD2020Light yellow liquid400 – 1000 mPas≥13%Shear Strength: ≥3.4 MPa(after 24h)WD2134Ivory-white liquid400 – 1000 mPas≥18%Shear Strength: ≥1.5MPaWD2136Brown liquid200 – 400 mPas≥40%Peel Strength: ≥15 N/2.5cm (on PP)WD2138Ivory-white liquid1.0 – 2.0 Pas≥20%Shear Strength: ≥1.0MPa User Guide: 1. Clean the surfaces to be bonded, and ensure that surfaces are dry and there's no dust and grease on the surfaces; 2. Apply the adhesive to one of the surfaces to be bonded, and then put the other surface together and press 3. Under room temperature, after 30 60 minutes you can get the initial strength; and 24 hours later, you can get the full strength Cautions: 1. Keep the lid closed tightly; 2. Keep the product in a cool and dry place; 3. You can dilute the product by ethyl acetate.