Kangda 5 минут AB клей

The 5-Minute AB glue is a two component and room temperature curing acrylate adhesive. KangDa 5-Minute AB Glueis designed forbonding different metals, wood, ceramic, concrete, marble, asbestos and plastics and is widely used in automobile and motorcycle repairing, emergency & fast reparing and DIY market. 1. Fast curing in 5 minutes only. 2. High bonding strength after initial curing. 3. Suitable for bonding a wide variety of materials: Metal, stone, wood, plastic, ceramic, glass, marble, etc. 4. Can be used for bonding oily surface. 5. Mixing ratio of A&B is 1: 1, not as strict as epoxy adhesive, just estimate the volume by eyeballing. User Guide: 1) Puncture seal with the reverse of tube cap; 2) Clean the surfaces to be bonded and make the surface dry and free of dirt; 3) Squeeze out equal volume of two parts from each tube and mix them thoroughly 4) Apply the mixed adhesive to the surfaces, put the surfaces together and press hard 5) The glue will cure in 5 minutes (under 23degrees C). Once the glue initially cures, we can get 70% bonding strength, and it can be handled. Item Part APart BRemark Appearance Green viscous liquidDark-red viscous liquidViscousity 4.0 – 6.0 Pa.S8.0 – 10.0 Pa.S At room temperatureCuring SpeedLess than 5.0 minutes At 23°CStrength Shear strength: ≥20.0 MPaAt 20°C and after curing 24 hours curingTensile Strength: ≥15.0 MPaShelf life 12 months At 25°C